Main menu


Fix the Front Camera on the iPhone 4 and iPhone 4S

  The most effective method to Fix the Front Camera on the iPhone 4 and iPhone 4S 

How to fix the forward-looking camera on your iPhone 4? In the event that your a FaceTime fanatic and the forward-looking camera is giving you fits, it might be supplanted. Here are 13 simple advances that disclose how to do it. 

Fix the Front Camera on the iPhone 4 and iPhone 4S

Stage 1: 

- Turn off your iPhone 

Stage 2: 

- Remove the last 2 screws on your iPhone 4. Utilize your five-point security screwdriver for this as all adaptations of the CDMA iPhone 4 have security tightens the dock connector. 

- To eliminate the back essentially slide the back upwards and lift it off delicately. 

Stage 3: 

- Remove the battery, you'll have to eliminate the #00 screw holding the battery cut set up. Eliminate this screw situated to the base left of the battery. 

- The metal clasp on the battery is the thing that cuts the battery to the rationale board. You'll have to pop this clasp up with your plastic pry apparatus. Just stick the finish of your pry device underneath the clasp and tenderly draw upwards until it detaches from the rationale board. 

Try not to USE THE PLASTIC PULL TAB, there is a ton of cement and the tab will break or you will harm the battery. Rather run your pry device along the correct side of the battery and break the glue that way. When the battery is liberated from the cement, you can haul the battery out of the telephone. There are no different connectors holding it in. 

Stage 4: 

- Remove the establishing cut, it is to one side of where you disengaged the battery. You will see another screw that is holding in the establishing cut over the receiving wire, eliminate this screw. 

- Unscrew the one screw holding the establishing cut set up with your #00 Phillips screwdriver. 

- Gently lift the establishing cut out of the gadget. 

Stage 5: 

- Remove the dock connector shield and separated the link 

- There is a shield hung on with two screws covering the dock connector link. Eliminate the two sinks holding its place. 

- Next, utilize your pry instrument to pry up the real dock connector link. 

Stage 6: 

- Unclip the reception apparatus from the rationale board, Underneath where you eliminated the establishing cut, you'll see a small round link. You'll have to unclip it from the rationale board. 

- Take the edge of your pry apparatus or spudger and tenderly pry up the roundabout head to disengage it from the rationale board. 

- You'll see the link is twisted around some metal sections. Just tenderly guide it out of the sections with your pry apparatus and finger. It's connected to the speaker gathering. 

Stage 7: 

- Remove the top rationale board shield, There are 5 screws holding the rationale board shield set up. Eliminate the 5 tightens holding its place in addition to screw number 6 off to one side. Simply make certain to recall which openings they emerged from as the screws are various sizes. 

- Next, you'll have to eliminate the shield. There is a small clasp incorporated with the shield holding it set up. Get the shield by the top where the top screw came out and tenderly lift up and push down. The base score will come out and you ought to have the option to delicately lift the shield out of the gadget. 

Stage 8: 

- Remove wifi reception apparatus establishing cut, The number 6 screw we eliminated beforehand has a clasp underneath it. Delicately utilize your pry device to eliminate it. 

Stage 9: 

- Disconnect 7 links from the rationale board, Pop up all the links by tenderly lifting them with your pry device or spudger. 

- Next, tenderly lift the camera out of the gadget. You'll see there is a little tab that is situated underneath the LCD and digitizer links to one side. 

- Pay close consideration regarding the heading wherein the links spring up. The link farthest to the correct will spring up the other way of the others. 

Stage 10: 

- Remove the rationale board, There are 5 sinks you'll have to eliminate request to eliminate the rationale board. Three should be taken out with a level cutting edge screwdriver while the other two will be eliminated with your #00 Phillips screwdriver. 

- Remove the screws numbered 1-3 utilizing your level cutting edge screwdriver. Ensure you recollect which ones go whereas the heads are somewhat unique. 

- Now eliminate screws 4 and 5 with your #00 screwdriver. Notice that the screw named number 5 will have a minuscule gold establishing cut for the camera underneath it. Ensure you don't lose this and spare it for re-gathering. 

- You should now have the option to eliminate your rationale board. Holding it at the base, tenderly force it upwards. 

- Take note that there is a little elastic piece that sits at the highest point of the rationale board. You will require this for re-gathering so ensure it doesn't tumble off. In the event that you lose this, you could encounter wifi or gathering issues. 

Stage 11: 

- Remove the metal retainer and forward-looking camera, There is a metal retainer covering the forward-looking camera. To eliminate it utilize your pry apparatus to delicately pull it off. Ensure you don't lose it as you'll require it for reassembly. Since the metal retainer has been eliminated you can tenderly lift the forward-looking camera out of the iPhone 4. 

Stage 12: 

- Replace the forward-looking camera and metal retainer, Now supplant the forward-looking camera with the new part. When it is safely set up you can supplant the metal retainer by snapping it back set up. 

Stage 13: 

- Reassemble your iPhone 4, Once you've gotten the forward-looking camera situated in effectively and the metal retainer adjusted back properly to hold it down, you're prepared to wrap up putting your Verizon or Sprint iPhone 4 back together. 

Stage 14: 

- Enjoy!!!!